CTEK 1027 Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} CTEK 1027. CTEK 1027 8 pagina's. Dc/dc ic recorder

INSTAllINg ThE ChARgER IN ThE VEhIClE

Install the charger on a surface where it can be properly fixed and where the charger is not exposed

to fuels, oils or splashes of dirt. Mount the charger with screws intended for the surface and attach

it with one screw in each of the four holes in the corners of the charger. See picture 1. Mount the

charger with M4 or ST4.2 screws with maximum torque of 2Nm.

Target battery –

Supply source –

Target battery +

Supply source +

M4 or ST4.2

Temperature

sensor

Max torque 2Nm

Picture 1

WARNINg

Due to high risk of short circuit, batteries should not be connected to power cords when installing

the charger.