Acorn TERRAZZO-WARE Series Aanbevolen reinigings- en onderhoudsprocedures - Pagina 2
Blader online of download pdf Aanbevolen reinigings- en onderhoudsprocedures voor {categorie_naam} Acorn TERRAZZO-WARE Series. Acorn TERRAZZO-WARE Series 3 pagina's. Shower bases
Pagina afdrukkenI N S T A L L A T I O N
ACORN ENGINEERING
COMPANY
HANDLING
1
Carefully remove Shower Base from carton at
installation point. Avoid placing Shower Base
on its edge. (This precaution will prevent
damage to corners of Shower Base.)
METHOD FOR CHECKING FACE OF Shower
Base FOR TRANSPORTATION DAMAGE:
A. Wipe face of Shower Base with a wet
cloth (Water).
B. When the water evaporates, any slight
crack in the Shower Base will be
noticeable.
LEVELING
2 2
Level Shower Base carefully. For proper
installation, establish a 1/4" clearance
between Shower Base and the walls. Alayer
of mortar or sand must be placed in area
where the Shower Base is to be installed.
This procedure is recommended in order to
support Shower Base should the sub floor
be uneven. Grout should be exposed along
edges.
NOTE: Mortar or sand must cover the entire
area between Shower Base and building
floor.
*NOTE: Inspect and test for proper
drainage.
ADA Shower Base to be recessed. Check
local authority for code and installation
requirements.
WARNING!
2 3
DO NOT DROP SHOWER BASE OVER
EXPOSED PIPE.
It is advisable to remove drain pipe and set
Shower Base in place. Insert pipe through
drain in Shower Base back into "P" trap.
Tighten with an internal pipe wrench.
TERRAZZO-WARE
800-488-8999 or 626-336-4561
FAX 626-961-2200
P.O. BOX 3527 • CITY OF INDUSTRY, CA 91744-0527 (U.S.A.)
I N S T R U C T I O N S
Shower Bases
REMOVE SHOWER BASE CAREFULLY
FROM CARTON
REMOVE PACKAGING
WITH CARE
1/4"
RECOMMENDED
1/4" SPACE
DOTTED AREA IS
FOR MOP SINK
DO NOT DROP
ON PIPE
REMOVE PIPE
FROM TRAP
Shower Bases
AVOID STANDING
SHOWER BASE ON END
SAND OR
MORTAR BED
SUB FLOOR
GROUT EXPOSED
SIDES
REINSERT PIPE AND TIGHTEN
WITH AN INTERNAL WRENCH
3030-737-000 Rev. 03/04/13