Directed Video VC2010 Installatiehandleiding voor de eigenaar - Pagina 14

Blader online of download pdf Installatiehandleiding voor de eigenaar voor {categorie_naam} Directed Video VC2010. Directed Video VC2010 16 pagina's. Directed electronics video cassette recorder owner's guide installation guide

Pagina afdrukken

Troubleshooting

Before calling for service, check the following:
PROBLEM
No Power.
Videocassette cannot be inserted.
No picture, distorted picture
playback.
No TV picture.
Streaks (noise) on a taped program.
Streaks (noise) or jitter with
the VCR in Still mode.
Streaks (noise) on a taped program.
The VCR motor continues to run
after STOP is pressed.
14
SOLUTION
Make sure the VCR is on and connected to an operating
power source; check the remote for "good" batteries.
Press EJECT to see if a cassette is already in the VCR.
Make sure the videocassette is window-side up, with the
arrow pointing toward the VCR.
I
Try another videocassette to see if it plays back
properly.
I
Press TRK up or down to adjust the picture.
I
Set INPUT MODE on TV to AUX IN, VIDEO or EXTERNAL.
I
Make sure the TV is working properly.
I
If the problem occurs on more than one tape, try
using a video head cleaner cassette.
I
Check all connections between VCR and TV.
I
Make sure TV is on.
I
Press TRK up or down to adjust the picture.
I
Check all connections.
I
View another videocassette to see if it plays back
properly.
I
If the problem occurs on more than one tape, try
using a video head cleaner cassette.
Press TRK up or down to adjust the picture.
I
Check if the VCR is in Still mode.
I
Check if the cassette has been rewound.
This is normal; the video heads run for five minutes even
even after a cassette has been stopped.
© 2001 Directed Electronics, Inc.