Clarke 6470057 Montage-instructies

Blader online of download pdf Montage-instructies voor {categorie_naam} Clarke 6470057. Clarke 6470057 2 pagina's. Mitre saw

HELPFUL HINTS

Mounting

You may prefer to mount the Mitre Saw on a firm foundation - a workbench or

work table, to provide additional support. This is particularly advisable if you are

cutting larger pieces.

Drill suitable holes in the base for this purpose, securing with screws, flat washers

and wing nuts for quick and easy removal, if required.

Cutting Simple Mitres or Bevels

Simple mitres or bevels are cuts made in one plane only. Lift the Locking lever so

MITRE SAW

that the Carriage may be moved to the desired angle as shown in fig 7.

Fig. 8

Fig. 7

MODEL No.

MBS550A

Part No. 6470057

Setting the Carriage to the angles shown in fig.8, will produce the mitres illustrated.

General

When cutting, DO NOT force the saw blade as this will lead to distortions and

inaccurate bevels. A very gentle pressure ONLY is required.

Ensure the saw blade is correctly tensioned before use - too slack will allow the

blade to twist, producing innaccurate mitres.

Use the Depth of Cut Stops for accuracy

For Spare Parts and Servicing, please contact your nearest dealer, or

CLARKE International, on one of the following numbers.

PARTS - 0181 558 6696 : SERVICE - 0181 556 4443

PARTS & SERVICE FAX - 0181 558 3622

ASSEMBLY INSTRUCTIONS

1298