Clarke Contractor CON185 Handleiding voor bediening en onderhoud - Pagina 9
Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clarke Contractor CON185. Clarke Contractor CON185 17 pagina's. 185mm circular saw with laser guide
Pagina afdrukken
CARTON CONTENTS
The following items should be supplied in the carton. If any parts are missing or
damaged, please contact the Clarke dealer where you purchased the tool.
• 1 x 1600 Watt Circular Saw.
• 1 x 185 mm Ø x 16 mm Bore x 24 Tooth TCT blade.
• 1 x Parallel Fence.
• 1 x 6 mm Hexagon Key.
ADJUSTMENTS
DEPTH OF CUT ADJUSTMENT
1. Loosen the depth adjustment
lever.
2. Adjust the base plate until the
required depth of blade is
protruding through the base
plate.
3. Tighten the depth adjustment
lever.
NOTE: For optimum results, a full
tooth should just be visible
below the workpiece.
BEVEL ADJUSTMENT
1. Loosen the bevel adjustment
locking lever.
2. Adjust the base plate to the
required angle (max
• Use the bevel scale as a guide
only, for accurate angles use a
protractor.
3. Tighten the bevel adjustment
locking lever to secure.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
o
45
)
9