Clarke CSS16V Gebruiks- en onderhoudsinstructies - Pagina 6
Blader online of download pdf Gebruiks- en onderhoudsinstructies voor {categorie_naam} Clarke CSS16V. Clarke CSS16V 15 pagina's. 400mm (16") variable speed scroll saw
Pagina afdrukken
ELECTRICAL CONNECTIONS
Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through an
approved 13 amp BS 1363 plug, or a suitably fused isolator switch.
IMPORTANT: The wires in the mains lead are coloured in accordance with the following
code:
As the colours of the flexible lead of this appliance may not correspond with the coloured
markings identifying terminals in your plug proceed as follows:
•
Connect GREEN & YELLOW coloured cord to plug terminal marked with a letter "E"
or Earth symbol "
•
Connect BROWN coloured cord to plug terminal marked with a letter "L" or coloured
RED.
•
Connect BLUE coloured cord to plug terminal marked with a letter "N" or coloured
BLACK.
If this appliance is fitted with a plug which is moulded onto the electric cable (i.e. non-
rewirable) please note:
1. The plug must be thrown away if it is cut from the electric cable. There is a danger of
electric shock if it is subsequently inserted into a socket outlet.
2. Never use the plug without the fuse cover fitted.
3. Should you wish to replace a detachable fuse carrier, ensure that the correct
replacement is used (as indicated by marking or colour code).
4. Replacement fuse covers can be obtained from your local dealer or most electrical
stockists.
FUSE RATING
he fuse in the plug must be replaced with one of the same rating (5 amps) and this
T
replacement must be ASTA approved to BS1362.
WARNING! THIS APPLIANCE MUST BE EARTHED
Green & Yellow
Blue
Brown
" or coloured GREEN or GREEN & YELLOW.
-
Earth
-
Neutral
-
Live
6