Clarke 6925601 Handleiding voor bediening en onderhoud - Pagina 9

Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clarke 6925601. Clarke 6925601 13 pagina's. 2.8kw 230v ptc electric fan heater

Pagina afdrukken

SERVICE & REPAIRS

Have your heater repaired by a qualified person using identical replacement

parts. This will ensure that the safety of the heater is maintained.

TROUBLESHOOTING

Problem

Heater does not

operate, although

plugged in with the

switch and

thermostat

switched on.

Heating element

glowing hot.

The unit has failed

to heat up so only

the air fan has

operated.

Abnormal noise.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the

obligation to deal with the WEEE in accordance with the WEEE

regulations in relation to the treatment, recycling & recovery and

environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general

household waste. It must be disposed of according to the laws governing

Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal

facility.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

Possible Cause

Plug is loose/bad

connection.

Fuse blown or

circuit breaker

trips.

No power at

socket outlet

Input voltage too

high.

Air inlet grille is

blocked.

Control switch not

set at a

"HEATING" level.

Thermal cut out

device is active/

thermostat has

tripped

Heater is not level. Stand heater on a level surface.

Remedy

Pull the plug out & check all

connections (cable/plug and socket).

Replace if necessary and investigate

cause. If fuse blows repeatedly,

consult your CLARKE dealer.

Insert the plug in a suitable socket.

Use a power supply in accordance

with the rating on the label.

Ensure the heater is kept away from

any objects which could cover the air

inlet or be drawn into it.

Turn switch to a heating level.

Turn the thermostat and listen. If there

is no CLICK and the thermostat is not

damaged, the heater will

automatically switch ON when it has

cooled down.