LEGO Vision Command 9731 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} LEGO Vision Command 9731. LEGO Vision Command 9731 23 pagina's. Mindstorms toys constructopedia

Pagina afdrukken

LEGO CAM

LED lights up when the LEGO Cam

is in operation

5 meter/15 feet cable attaching

to the USB port of the computer

This is the LEGO Cam, a powerful PC Video Camera. You can capture still images

and video, which you can edit and email to your friends, or you can attach it to

your LEGO robots to create robots that see.

Push button for

still pictures

Microphone

Focus ring for manual

focusing of the image

GETTING STARTED

Installing the software, and Camera Setup

Be sure to install the software before plugging in the camera.

1. Insert the Vision Command software CD into the CD-ROM drive of your computer.

2. Wait a few seconds. The installation screen of the Vision Command software should

automatically be launched when you insert the CD-ROM into your drive.

If you do not see the installation screen, double-click your CD-ROM drive icon in the

Windows Explorer

. Then double-click the Setup.exe program. You should now be able

to install the software.

3. During software installation, Setup will prompt you to connect the camera cable

to your computer.

4. Remove the camera from the box.

5. Remove the protective cap from the end of the camera cable.

6. Insert the camera cable into the USB port. The USB port may be at the back of the

computer, or on the monitor.

7. Continue with the software installation by following the on-screen prompts.

Note: Windows 9 8 CD may be required during installation.

How to connect to USB Port