Clarke IQ2000S Montage- en bedieningsinstructies - Pagina 8
Blader online of download pdf Montage- en bedieningsinstructies voor {categorie_naam} Clarke IQ2000S. Clarke IQ2000S 13 pagina's. Infrared quartz heater
Pagina afdrukken
FAULT FINDING
SYMPTOM
Heater does
not
operate,
although
plugged in
and
switched on.
TECHNICAL SPECIFICATION
Dimensions (L x W x H)
Assembled height on stand
Weight (including stand)
Electrical Supply
Power Cable length
Protection Degree
Operating Temperature
Tilt Range
Heat Output
ENVIRONMENTAL RECYCLING POLICY
Through purchase of this product, the customer is taking on the
obligation to deal with the WEEE in accordance with the WEEE
regulations in relation to the treatment, recycling & recovery and
environmentally sound disposal of the WEEE.
In effect, this means that this product must not be disposed of with general
household waste. It must be disposed of according to the laws governing Waste
Electrical and Electronic Equipment (WEEE) at a recognised disposal facility.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
PROBLEM
Plug is loose/ bad
nection.
Fuse blown.
No power at socket outlet. Insert plug into a suitable socket.
Input voltage incorrect.
con-
Remove the plug & check the con-
nection of the plug and socket.
Replace if necessary and investi-
gate the cause. If fuse blow
repeatedly, consult your Clarke
dealer.
Ensure power supply matches the
rating on the label.
175 x 480 x 270 (lamp unit) mm
1575 (min) to 1900 (max) mm
10.75 kg
230 V / 50hz
1.8 m
IP24 (water splash)
°
-20 to 30
C
Level to -25 degrees
2 kW
8
SOLUTION