Clarke 6500411 Gebruiksaanwijzing - Pagina 3

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Clarke 6500411. Clarke 6500411 13 pagina's. 12” disc sander

GENERAL SAFETY RULES

WARNING: WHEN USING ELECTRIC TOOLS BASIC SAFETY PRECAUTIONS

SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK AND PERSONAL INJURY INCLUDING THE FOLLOWING. READ ALL

THESE INSTRUCTIONS BEFORE ATTEMPTING TO OPERATE THIS PRODUCT

AND SAVE THESE INSTRUCTIONS.

1. Keep work area clear - Cluttered areas and benches invite injuries.

2. Consider work area environment - Do not expose tools to rain, Do not use

tools in damp or wet locations., Keep work area well lit. Do not use tools in

the presence of flammable liquids or gases.

3. Guard against electric shock - Avoid body contact with earthed or

grounded surfaces (e.g. pipes, radiators, ranges, refrigerators).

4. Keep other persons away - Do not let persons, especially children, not

involved in the work touch the tool or the extension cord and keep them

away from the work area.

5. Store idle tools - When not in use, tools should be stored in a dry locked-up

place, out of reach of children.

6. Do not force the tool - It will do the job better and safer at the rate for which

it was intended.

7. Use the right tool - Do not force small tools to do the job of a heavy duty

tool. Do not use tools for purposes not intended; for example do not use

circular saws to cut tree limbs or logs.

8. Dress properly - Do not wear loose clothing or jewellery, they can be

caught in moving parts. Non-skid footwear is recommended when working

outdoors. Wear protective hair covering to contain long hair.

9. Use protective equipment - Use safety glasses. Use face or dust mask if

working operations create dust.

10. Connect dust extraction equipment - If the tool is provided for the

connection of dust extraction and collecting equipment, ensure these are

connected and properly used.

11. Do not abuse the cord - Never yank the cord to disconnect it from the

socket. Keep the cord away from heat, oil and sharp edges.

12. Secure work - Where possible use clamps or a vice to hold the work. It is

safer than using your hand.

13. Do not overreach - Keep proper footing and balance at all times.

14. Disconnect tools - When not in use, before servicing and when changing

accessories such as blades, bits and cutters, disconnect tools from the

power supply.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]