Clarke 7640110 Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Clarke 7640110. Clarke 7640110 13 pagina's. Shot blast cabinet

Thread a flat washer, followed by the

extended nut, onto the adapter, from

the outside of the cabinet, and

tighten.

Insert the circular foam filter into the

recess in the Air Vent Cover, and

attach the cover to the rear of the

cabinet as shown in Fig 3, having first

prised out the plastic bung from the

vent hole.

The pick up hose should be attached

to the bottom of the cabinet as

shown in Fig 4, using the large washer

and nut underneath.

Replace the grid, ensuring the feet

face downwards with the cut away

section at the rear of the cabinet.

Finally, connect the air supply to the

extended nut shown in Fig 5. Use of

the PTFE tape supplied with ensure an

airtight seal.

• The air supply should be dry and

capable of delivering a minimum

of 10 cu ft/min at 100 lbf/in.

SAFETY PRECAUTIONS

Ensure you comply with all precautions regarding the use of air compressors

and compressed air equipment.

• Ensure all air connections are secure.

• Do not use the machine if the integral gloves are ripped or unserviceable.

• Keep the jet well away from the air hose, gloves, florescent tube & window.

• Ensure the clear plastic lid is firmly secured before pressing the trigger.

ALWAYS wear safety glasses. (Normal eye glasses are NOT safety glasses).

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]