Clarke CDTJ12 Handleiding voor bediening en onderhoud - Pagina 8
Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clarke CDTJ12. Clarke CDTJ12 12 pagina's. Dovetail jig
Pagina afdrukken
SETTING THE BACKSTOP POSITION
The distance the backstop needs to be positioned from the front of the
template fingers depends on the size of router base fitted to your router,
The formula to calculate this is:-
router base diameter
(
2
EXAMPLE
Using a router which has a base diameter of 160 mm, making a drawer that
has sides 18 mm thick and using the standard cutter supplied with a tip
diameter of 14.8 mm.
router base diameter
(
2
160 mm
(
2
(
80 mm
The distance from the tips of the template fingers to the vertical face of the
backstop should be set at 108.6 mm.
1. Set a micrometer or vernier
caliper to the calculated depth
and adjust the backstop as
shown.
2. Lock into place using the
backstop locking screws.
• It is not essential that this setting
is exact at this stage as final
adjustments can be made later
on.
• Ensure that the template and back stop stay parallel with the front
edge of the jig during this setting procedure.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
)+(
2 x width of the drawer sides
)+(
2 x width of the drawer sides
)+(
2 x 18 mm
)+(
36 mm
Distance = 108.6 mm
)-(
)-(
)-(
)-(
8
cutter tip diameter
2
cutter tip diameter
2
)
14.8 mm
2
)
7.4 mm
)
)