Clarke CMC40B Montage-instructies - Pagina 3

Blader online of download pdf Montage-instructies voor {categorie_naam} Clarke CMC40B. Clarke CMC40B 4 pagina's. Car creepers

SAFETY PRECAUTIONS

1. NEVER allow the creeper to be used as a plaything such as a skateboard.

Keep children away at all times...this is NOT a toy.

2. ALWAYS use on a hard level surface, not in the vicinity of drains, holes,

curbs, cracks etc., as this could cause serious damage to the castors.

3. ALWAYS check your car creeper regularly for damage before use and if

any is apparent, have it repaired before use. Remember, broken, worn or

missing parts could result in injury.

4. DO NOT modify this product in any way. Unauthorized modifications may

impair the function and/or safety and could effect the life of the product.

5. DO NOT exceed the maximum rated load capacity.

6. DO NOT stand on the car creeper or use as a stepping device.

7. ALWAYS sit down slowly & carefully on the creeper to avoid shock loading.

8. DO NOT place under a car tyre to move or reposition a vehicle.

9. ALWAYS make sure the vehicle being worked on is properly supported with

axle stands and the wheels are chocked before going under the vehicle.

10. DO NOT drop the creeper onto the ground.

11. When not in use, it should be stored carefully and not left lying around for

others to trip over.

ASSEMBLY

1. Fit each castor to the creeper body

using the fastenings provided.

2. Insert the coachbolts through the

castors from below, inserting the

spacers into each of the mounting

holes before adding the washers and

locknuts from above.

3. Use the nut key supplied, or a suitable

socket wrench to tighten the nuts.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]