Clarke IT1500 Handleiding voor bediening en onderhoud - Pagina 14
Blader online of download pdf Handleiding voor bediening en onderhoud voor {categorie_naam} Clarke IT1500. Clarke IT1500 17 pagina's. Induction heater
Pagina afdrukken
4. After the heater has cooled down (approximately 15 minutes), release the
locking knobs and remove the coil, making sure the coil is cool to the
touch.
5. Replace heater and heating coils back in the storage case and store in a
safe place.
6. While disassembling, if necessary, replace the heating coils immediately
after a heating operation to be ready for the next heating operation.
CLEANING GUIDANCE
PROPER CLEANING AND CARE
1. When cleaning, make sure that the unit is switched off and unplugged. Use
a dry, clean, non-abrasive cloth or paper towel to remove grease, oil and
other dirt from the housing, tools and electrical cords before returning them
into the storage case.
2. For more stubborn grease, oil and dirt, use a generally available
non-volatile automotive interior cleaning product. Allow all components to
dry completely before using the heater.
IMPROPER CLEANING AND CARE
1. DO NOT immerse any components of the unit in water or cleaning solutions.
2. DO NOT spray the unit with a stream of water from a hose or wash any parts
under a stream of water from a tap, hydrant or shower.
3. DO NOT clean any components with volatile organic compounds such as
petrol, benzene, kerosene, vanish remover, fuel oil, methyl ethyl ketone
(MEK), brake part cleaner, plastic adhesive solvents, paint remover and
thinners, etc. These substances are fire hazards and will harden or dissolve
the polymer materials used in the components of the heater.
4. DO NOT use torches, space heaters, heat guns, gas ovens or microwave
ovens, etc. to dry the components of the heater after cleaning.
14