CTM LYNG Microsafe mKomfy Hybrid R-T Handleiding voor installatie-instructies - Pagina 5
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} CTM LYNG Microsafe mKomfy Hybrid R-T. CTM LYNG Microsafe mKomfy Hybrid R-T 16 pagina's. Cooker guard
Ook voor CTM LYNG Microsafe mKomfy Hybrid R-T: Gebruiksaanwijzing (2 pagina's)
Pagina afdrukkenStatus LEDs
Green
lights up
Blue
flashes
flash
Blue +
alter-
Green
nately
Red
flashes
flashes +
Red
beeping
Yellow lights up
Yellow flashes
* emergency mode = all safety functions deactivated. See page 15.
** 1.2 A is the factory default. After calibration, the LED lights up when the
new setting is exceeded (page 12)
If there is no radio communication from the sensor, the relay will shut off after
5 minutes.
Other functions
Hold the button on the relay in for the desired function
Time
Release button when Function
40 ms - 1 s (short press)
3 s - 5 s
Yellow + Red light up Pairing signal to HUB
Yellow lights up,
5 s - 8 s
Red has gone out
10 s - 12 s
Red + Green flash
15 s - 20 s
Red flashes
20 s +
All LEDs go out
when relay is ON
when data is received from paired units (e.g. sensor)
1 minute after emergency mode is activated and
continue to flash while the product is in emergency
mode (12 hours).
if relay overheats – relay is turned OFF
if there is an error, e.g. external switch paired before
sensor
when cooker's electricity consumption exceeds 1.2 A**
in pairing mode
Pairing
Number of devices paired. When the button
is released, this is shown by the number
of yellow flashes
Calibrating electricity consumption
Reset and deletion of paired devices. Relay is
turned off if it was on
Cancel/no setting changed
Installation – Relay
5