DirekTronik SX-SWE01B Bedieningshandleiding - Pagina 17

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} DirekTronik SX-SWE01B. DirekTronik SX-SWE01B 20 pagina's. Mixed input type-c vga hdmi, hdmi 2.0 hdbaset switch, support 4k@60hz yuv4:4:4, 18gbps, hdr

Pagina afdrukken

Note:

1).If current input have signal,device will not auto switch to other input when reboot,it will keep current input.

2).When all input no have signal,device save last switch port when reboot.

3).The priority mode only valid when device with signal input.

12. RS232 Pass through

By RS232 Command , the HDBaseT switch can send RS232 data to control the receivers ,also the

receiver can send RS232 data to control the HDBaseT switch.

Please refer to the command list which included in the manual.

13. Micro USB for Firmware Upgrade

13.1 MCU application layer upgrade

1). The user should use the CD in colorbox,read and install software

2). Connect unit to PC with USB cable from micro USB port,click

choose correct COM port that connect to product,and baudrate 115200(default).The baud rate setting is

consistent with the host baud rate.

3). Type in "A1" in PORT and choose update program file in PATH,then click UPDATA wait for update until it

prompt "Succeed" informations and upgrade completed:

13.2 GUI application layer upgrade

1). Connect unit to PC with USB cable from micro USB port,click

choose correct COM port that connect to product,and baudrate 115200(default).The baud rate setting is

consistent with the host baud rate.

2). Type in "A1 01" in PORT and choose update program file in PATH,then click UPDATA wait for update

until it prompt "Succeed" informations and upgrade completed:

Operating Instruction

on PC;

software,REFRESH and