DirekTronik EL2315 Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} DirekTronik EL2315. DirekTronik EL2315 2 pagina's. Dual rate sfp media converter

Pagina afdrukken
The Port Status LEDs
Functional Description
Complies with IEEE802.3 10Base-T, IEEE802.3u 100Base-TX/FX, IEEE802.3ab 1000Base-T, and IEEE802.3z 1000Base-SX/LX.
Supports IEEE802.3x Flow control: Flow control for Full-duplex and Back pressure for Half-duplex.
SFP fiber interface supports 100Base and 1000Base dual rate fiber transmission.
DIP switch configuration for "Link-Fault-Pass-Through".
Gigabit transmission supports 9K Bytes jumbo frame.
1000Mbps-Auto/Full-duplex, 10/100Mbps-Full/Half-duplex, Auto-Negotiation, Auto-MDI/MDIX.
Full wire-speed forwarding rate.
Operating voltage and Max. current consumption: 0.23A @ 12VDC. Power consumption: 2.76W Max.
Power Supply: 12VDC external universal PSU.
0℃ to 50℃ (32℉ to 122℉) operating temperature range.
Aluminum case.
Supports Wall Mounting installation or use with media converter chassis system.
Unpacking
Open the carton and unpack the items. Your package should include an EL2315 media converter and this Quick Install Guide. If items are missing
or damaged, notify your EtherWAN representative Direktronik AB
Download the full manual at:
https://www.etherwan.com
EL2315 Dual Rate SFP Media Converter
LEDs State
PWR Steady Power on
LFPT Steady LFPT function enabled
LNKC Steady Copper port: A valid network connection established
G:GE
A:100
LNKF Steady Fiber port: A valid network connection established
GE
www.direktronik.se
2
Indication
PWR stands for POWER
Off
Power off
Off
LFPT function disabled
LNKC stands for LINK/Copper
Off
No connection
Steady Green: Connection at the speed of 1000Mbps
Amber: Connection at the speed of 100Mbps
Off
Connection at the speed of 10Mbps
LNKF stands for LINK/Fiber
Off
No connection
Steady Force fiber port to 1000Base
Off
Force fiber port to 100Base
V2