CLAS OC 0113 Handmatig - Pagina 8

Blader online of download pdf Handmatig voor {categorie_naam} CLAS OC 0113. CLAS OC 0113 12 pagina's. Auto dent repair kit with slide hammer

OC 0113

AUTO DENT REPAIR KIT WITH SLIDE HAMMER

USE

Preparation

Connect the glue gun to the power supply.

Heat the glue to operating temperature by inserting a glue stick into the gun.

Apply hot glue to the dent

While the glue is still hot, press the appropriate tablet into the glue. Wait for the glue to harden.

Pulling lever (traction tool)

Place the pulling clamp on the line.

Connect the tablet into the slotted opening at the end of the traction shaft.

Adjust the distance using the knurled wheel above the handle.

Gently close the handles of the extractor by pulling outwards.

Pulling bumps (sliding hammer)

Follow the preparation steps

Connect the inertia mass to the pellet.

Remove the line by hitting the weight of the sliding hammer against the stop.

Removal

When the dent has been satisfactorily treated, tighten the knurled wheel fully and tighten the

handles until the pad comes off.

The tablets can be reused.

Use the nylon chisel or solvent bottle to remove the tablets.