Lenovo ThinkCentre POS Gebruikershandleiding - Pagina 19

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Lenovo ThinkCentre POS. Lenovo ThinkCentre POS 48 pagina's.

Chapter 3. UEFI BIOS

Turn on or restart the computer. When the logo screen is displayed, press F1 or Fn+F1 to enter the UEFI

BIOS menu.

Note: If you have set UEFI BIOS passwords, enter the correct passwords when prompted. You also can

select No or press Esc to skip the password prompt and enter the UEFI BIOS menu. However, you cannot

change the system configurations that are protected by passwords.

Follow the on-screen instructions to navigate in the UEFI BIOS menu.

The table below introduces the available settings of the UEFI BIOS menu. You can follow the on-screen

instruction to navigate in the UEFI BIOS menu.

Note: The UEFI BIOS menu might vary depending on system configurations.

Introduction

Main

This category provides the general product-related and firmware information including system

summary, machine type, product serial number, UUID number, etc.

Devices

This category introduces how to configure various devices such as USB ports and audio

controllers.

Advanced

This category provides advanced information about the computer such as the CPU features.

Power

This category introduces power and thermal management solutions.

Security

This category introduces various passwords, locks, and software to protect your computer.

Startup

This category introduces how to set the boot priority order.

Exit

This category introduces how to exit as you prefer.

You can go to Lenovo BIOS Simulator Center

detailed settings by your product name.

Note: The Lenovo BIOS Simulator Center makes periodic updates of the settings. The UEFI BIOS simulator

interface and description of settings might be different from that on your actual user interface.

Lenovo computers meet the eco-design requirements of the ErP Lot 3 regulation. Follow the instruction to

enable or disable the ErP LPS compliance mode.

For more information about the eco-design requirements, go to:

eco-declaration

You can enable the ErP LPS compliance mode to reduce the consumption of electricity when the computer

is off. To enable or disable the ErP LPS compliance mode:

Step 1.

Restart the computer. When the logo screen is displayed, press F1 or Fn+F1.

https://download.lenovo.com/bsco/index.html

https://www.lenovo.com/us/en/compliance/

to explore the