Lenovo Thinkpad edge 13 Handleiding voor probleemoplossing - Pagina 37

Windows 7

• Power plan: Energy Saver at AC mode

Turn off the display: After 10 minutes

Put the computer to sleep: After 25

Advanced power settings:

- Turn off hard disks: After 15

minutes

- Hibernate: Never

To awaken your computer from Sleep (Windows 7) or System Standby (Windows

XP) mode, press Fn key on your keyboard. For more information about these

settings, see your Windows Help and Support information system.

The Wake on LAN

shipped from the factory, and the setting remains valid even when the computer is

in Sleep or Standby mode. If you do not need to have Wake on LAN set to Enable

while your computer is in Sleep or Standby mode, you can reduce the power

consumption and prolong the time in Sleep or Standby mode, by switching the

setting of Wake on LAN for Sleep or Standby mode to Disable. To switch the

setting of Wake on LAN, go to Device Manager and do as follows:

For Windows 7:

1. Click Start ➙ Control panel.

2. Click Hardware and Sound ➙ Device Manager.

3. In the Device Manager window, expand Network adapters.

4. Right-click your network adapter device, and click Properties.

5. Click the Power Management tab.

6. Clear the Allow this device to wake the computer check box.

7. Click OK.

For Windows XP:

1. Click Start ➙ Control panel.

2. Click Performance and Maintenance ➙ System.

3. Click the Hardware tab, and click Device Manager.

4. In the Device Manager window, expand Network adapters.

5. Right-click your network adapter device, and click Properties.

6. Click the Power Management tab.

7. Clear the Allow this device to bring the computer out of standby check

box.

8. Click OK.

function is set to Enable when your Lenovo computer is

Windows XP

• Power scheme: Energy Saver at AC

mode

Turn off monitor: After 10 minutes

Turn off hard disks: After 15 minutes

System standby: After 25 minutes

System hibernates: Never

Appendix C. Notices