Lenovo ThinkSERVER TS130 Systeeminstallatiehandleiding - Pagina 5

9. Before you log on to the server for the first time, follow the instructions on the screen to change your

password when prompted.

Note: The password must be a combination of upper case letters, lower case letters, and numbers.

You might need the product key to activate the operating system.

Installing a Windows 7 operating system

This topic provides instructions on installing the following operating systems:

• Microsoft Windows 7 Professional Edition (x86 and x64)

• Microsoft Windows 7 Ultimate Edition (x86 and x64)

Notes:

• Ensure that you have prepared all the required items before installing an operating system. See "Before

installing an operating system" on page 1.

• Follow the instructions on the screen in addition to the instructions in this topic.

To install an operating system, do the following:

1. Insert the operating system installation disc into the optical drive that you have set as the first startup

device. Then, start the server from the optical drive.

2. When the message Press any key to boot from cd or dvd... is displayed, press any key. The message

Windows is loading files... is displayed, and installation files will be copied from the setup DVD to your

server. This process takes several minutes.

3. In the Install Windows window, configure the following options as you need and then click Next.

• Language to install

• Time and currency format

• Keyboard or input method

4. Click Install now.

5. Read the license terms and click I accept the license terms. Then click Next.

6. Select Custom (Advanced) for fresh installation.

7. When all hard disk drives available on the server are displayed, do one of the following to select or

create a drive partition in which to install the operating system:

• Create a partition automatically: If you want to use the entire hard disk drive as one primary partition,

select Disk 0 unallocated space for the hard disk drive on which you want to install the operating

system and then click Next. A partition will be created automatically.

• Manually create a partition: If you want to create a new partition manually, do the following:

a. Select Disk 0 unallocated space for the hard disk drive on which you want to install the operating

system, click Drive options (advanced), and then click New.

b. Type the amount of space (in MB), and then click Apply.

c. Click Next.

The selected drive partition will be formatted and the applicable files will be copied to the drive partition.

This process takes several minutes. After that, the server will restart.

Note: A message No drives were found might be displayed indicating that you do not have a mass

storage device driver installed. To install a mass storage device driver, connect the USB storage device

containing the RAID controller driver to your server, and then select Load Driver.