Lenovo ThinkStation 30C3 Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Lenovo ThinkStation 30C3. Lenovo ThinkStation 30C3 48 pagina's. Customer replaceable unit
Pagina afdrukken
Chapter 2. I/O box
Overview
Note: Depending on your computer model, the I/O box might be optional.
Figure 4. I/O box overview
1
USB 2.0 connectors (2)
3
USB 2.0 connectors (2)
5
USB 3.0 connector (for connecting to the computer)
Using the I/O box
When you use the I/O box with the ThinkStation
• The I/O box supports a maximum current rating of 5 A. It is recommended that you connect low-current
devices to the I/O box and connect high-current devices directly to the ThinkStation tiny computer to
ensure the best performance of the devices.
• The USB 2.0 connectors and USB 3.0 connectors on the I/O box provide a current of 500 mA and 900 mA
current, respectively. When you connect a high-current storage drive to only one USB connector, the
system might not recognize the device. You can connect the storage drive to two USB connectors on the
I/O box.
• The serial connector does not support hot swapping. Do not connect a device to the connector or remove
a device from the connector while the system is running.
• The connectors on the I/O box cannot be enabled or disabled individually. To enable or disable any of the
connectors on the I/O box, enable or disable the USB connectors on the rear of the computer.
© Copyright Lenovo 2017, 2018
2
Serial connector (optional)
4
USB 3.0 connectors (2)
®
tiny computer, note the following:
5