Lenovo Tripp Lite 2U Handleiding voor installatie-instructies - Pagina 6
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Lenovo Tripp Lite 2U. Lenovo Tripp Lite 2U 19 pagina's. Rack server
Pagina afdrukken
1
Threaded-hole rack
Rack Rear
Securing the server in the rack with threaded
holes for shipping.
Note: If you have installed the server in a rack with
threaded holes, you must remove the server from
the rack before installing the shipping brackets.
For servers installed in the rack with threaded
holes, install the two M4 screws 1 to fasten the
rear of the rail to the rack. Align the holes on the
shipping bracket 2 marked "Left" to the rear of
the left rail; then, install the screw 3 to secure the
shipping bracket to the rack. When installing this
screw, make sure the thread in the hole matches the
specific screw that is needed.
Install the other shipping bracket to the rear of the
right rail.
6
Installing shipping brackets to 2U server for shipping
3
Square-hole or
2
circle-hole rack
Rack Rear
Shipping
bracket
hooks
Securing the server in the rack with non-threaded
holes for shipping.
Note: The non-threaded holes will either be
square-shaped or circle-shaped.
For servers installed in the rack with non-threaded
holes, install the shipping bracket 1 marked "Left"
to the side of the left rail. Before installing, check
the non-threaded holes on the rack to see whether it
is square-shaped or circle-shaped. Afterwards, align
the shipping bracket to the corresponding hole on
the left side of the rail marked "2U". After knowing
which hole to align with, insert the shipping
bracket hooks into the holes of the rail. Upon
insertion, there should be no gap between the
shipping bracket and rail. Meanwhile, you will
notice the holes on the shipping bracket and rail are
not entirely aligned yet. For full alignment, shift the
shipping bracket to either the square-shaped or
circle-shaped icon. Finally, install the screw 2 to
secure the shipping bracket to the rack. Refer to the
following illustration for further details.
Install the other shipping bracket to the rear of the
right rail.
Circle-shaped holes
A
B
Square-shaped holes