Lenovo 14IAL7 Gebruikershandleiding - Pagina 26

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Lenovo 14IAL7. Lenovo 14IAL7 34 pagina's.

Pagina afdrukken

Step 2.

Select Security ➙ Set Administrator Password and press Enter.

Step 3.

Enter a password string that contains only letters and numbers and then press Enter

Step 4.

Enter the password again and press Enter.

Select Exit ➙ Exit Saving Changes.

Step 5.

Next time you start the computer, you must enter the administrator password to open the setup utility. If

Power on Password is enabled, you must enter the administrator password or the user password to start

the computer.

Change or remove administrator password

Only the administrator can change or remove the administrator password.

Step 1.

Open the UEFI/BIOS setup utility using the administrator password.

Step 2.

Select Security ➙ Set Administrator Password and press Enter.

Step 3.

Enter the current password.

Step 4.

In the Enter New Password text box, enter the new password.

Step 5.

In the Confirm New Password text box, enter the new password again.

Note: If you want to remove the password, press Enter in both text boxes without entering any

character.

Step 6.

Select Exit ➙ Exit Saving Changes.

If you remove the administrator password, the user password is also removed.

Set user password

You must set the administrator password before you can set the user password.

The administrator of the setup utility might need to set a user password for use by others.

Step 1.

Open the UEFI/BIOS setup utility using the administrator password.

Select Security ➙ Set User Password and press Enter.

Step 2.

Step 3.

Enter a password string that contains only letters and numbers and then press Enter.

The user password must be different from the administrator password.

Step 4.

Enter the password again and press Enter.

Step 5.

Select Exit ➙ Exit Saving Changes.

Enable power-on password

If the administrator password has been set, you can enable power-on password to enforce greater security.

Step 1.

Open the UEFI/BIOS setup utility.

Step 2.

Select Security ➙ Power on Password and press Enter.

Note: The administrator password must be set in advance.

Step 3.

Change the setting to Enabled.

Step 4.

Select Exit ➙ Exit Saving Changes.

User Guide