Lenovo C2 Series Gebruikershandleiding - Pagina 21

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Lenovo C2 Series. Lenovo C2 Series 45 pagina's. Machine type: 10075/3078, 10076/3079, 10077/3094, 10078/3095
Ook voor Lenovo C2 Series: Gebruikershandleiding (37 pagina's), Gebruikershandleiding (35 pagina's), Gebruikershandleiding (41 pagina's), Handleiding voor vervanging van hardware (25 pagina's), Gebruikershandleiding (29 pagina's), Gebruikershandleiding (47 pagina's), Gebruikershandleiding (43 pagina's), Snelstarthandleiding (20 pagina's), Gebruikershandleiding (45 pagina's), Gebruikershandleiding (19 pagina's)

Note about the service partition:

The files and relevant data used by the rescue system are saved in the service

partition. Deleting this partition will make the rescue system unusable. For more

detailed information, see the following instructions:

From the Search charm, select Apps → Control Panel → Administrative Tools

→ Computer Management → Disk Management, you can see the service

partition, which must not be deleted.

Note: The recovery files and relevant data used by the rescue system are

saved in the service partition. If the service partition is deleted or damaged

by someone other than authorized Lenovo service personnel, Lenovo will

not be liable for any losses arising therefrom in any way.

OneKey Recovery

OneKey Recovery is an easy-to-use application. You can use it to restore your

computer to the system default or to a previously backed up state.

Detailed Operation Procedure

1. Repeatedly press and release the F2 key once turning on the computer until

the Lenovo Rescue System opens, then select OneKey Recovery.

Note: System Recovery will overwrite all of the data on the C: drive. To

prevent loss of data, be sure to back up relevant data before performing

system recovery.

2. Follow the on-screen instructions to select the backup task you want to restore

from and the disk where you want to install the operating system, then press

Next to start the restore.

3. Please wait during the process of system recovery. Do not interrupt the

operation during the recovery process.

4. After the system is recovered successfully, the software will prompt you to

restart the computer. Restart the computer and start the operating system.

User Guide