Lenovo RackSwitch G8264 Producthandleiding - Pagina 7

Blader online of download pdf Producthandleiding voor {categorie_naam} Lenovo RackSwitch G8264. Lenovo RackSwitch G8264 23 pagina's.
Ook voor Lenovo RackSwitch G8264: Producthandleiding (26 pagina's)

Pagina afdrukken

API that enables the network administrator to easily configure and manage virtual networks that control traffic

on a "per-flow" basis. It creates multiple independent virtual networks and related policies without dealing

with the complexities of the underlying physical network and protocols. The G8264 is also the ideal switch to

use with industry compliant OpenFlow controllers.

Transparent networking capability

With a simple configuration change to Easy Connect Mode, the RackSwitch G8264 becomes a transparent

network device, invisible to the core, eliminating network administration concerns of Spanning Tree Protocol

configuration/interoperability, VLAN assignments and avoids any possible loops.

By emulating a host NIC to the data center core, it accelerates the provisioning of VMs by eliminating the

need to configure the typical access switch parameters.

Table 4 compares the features of the RackSwitch G8264 with the RackSwitch G8264T.

Table 4. Comparison of the RackSwitch G8264 and RackSwitch G8264T features

Port types

Latency

Stacking

Typical power

Copper cable length

Total distance

TCO

Features and specifications

Note: Features and specifications listed in this section are based on Networking OS 7.9.

The RackSwitch G8264 has the following features and specifications:

Form factor: 1U rack mount switch

RackSwitch G8264 Rear-to-Front version for ports located in the rear of the rack matching System

x®, BladeCenter® and Flex System® designs

RackSwitch G8264 Front-to-Rear version for ports located in the front of the rack matching airflow of

iDataPlex® ® and NeXtScale™ System designs

Ports

48 ports for 1 Gb or 10 Gb Ethernet SFP/SFP+ transceivers (support for 1000BASE-SX, 1000BASE-LX,

1000BASE-T, 10GBASE-SR, 10GBASE-LR, or 10GBASE-ER) or SFP+ direct-attach copper cables.

SFP+ modules and DAC cables are not included and must be purchased separately.

4 ports for 40 Gb Ethernet QSFP+ transceivers, QSFP+ to QSFP+ DAC cables, or QSFP+ to 4x 10 Gb

SFP+ break-out cables. QSFP+ modules and DAC cables are not included and must be purchased

separately.

One 10/100/1000 Ethernet port (RJ-45 connector) for out of band (OOB) management

One RS-232 serial port (mini-USB connector) that provides an additional means to configure the

switch

One USB port for mass storage devices

Scalability and performance

1 Gb, 10 Gb, and 40 Gb Ethernet ports for bandwidth optimization and performance

Up to 64 10 Gb Ethernet SFP+ connections (with optional break-out cables)

Non-blocking architecture with wire-speed forwarding of traffic and aggregated throughput of 1.28

Tbps

RackSwitch G8264

Based on SFP+

Lower latency - 880 nanosecond

Yes

Lower power - 330 watts

Up to 7 m

Up to 40 km with Transceiver

Less than other SFP+

RackSwitch G8264T

Based on 10GBase-T

3.2 microseconds

Competitive versus other 10GBase-T - 385 W

Up to 100 m

Limited to 100 m

Lower TCO – for 100 m and less (based on adapter,

cables and switch)