Lenovo RackSwitch G8264CS Producthandleiding - Pagina 9
Blader online of download pdf Producthandleiding voor {categorie_naam} Lenovo RackSwitch G8264CS. Lenovo RackSwitch G8264CS 27 pagina's.
Ook voor Lenovo RackSwitch G8264CS: Producthandleiding (27 pagina's)
![Lenovo RackSwitch G8264CS Producthandleiding](/uploads/products/server2/7306828/7306828.png)
Hot Links provides basic link redundancy with fast recovery for network topologies that require
Spanning Tree to be turned off
VLAN support
Up to 4095 VLANs supported per switch, with VLAN numbers ranging from 1 to 4095 (VLAN 4095 is
used by the management network.)
Port-based and protocol-based VLANs
802.1Q VLAN tagging support
Private VLANs support as defined in RFC 5517
Security
VLAN-based, MAC-based, and IP-based access control lists (ACLs)
802.1x port-based authentication
Multiple user IDs and passwords
User access control
Radius, TACACS+ and LDAP authentication and authorization
NIST 800-131A Encryption
Selectable encryption protocol
Quality of Service (QoS)
Support for IEEE 802.1p, IP ToS/DSCP, and ACL-based (MAC/IP source and destination addresses,
VLANs) traffic classification and processing
Traffic shaping and re-marking based on defined policies
Eight output Class of Service (COS) queues per port for processing qualified traffic
Weighted Random Early Detection (WRED) with Explicit Congestion Notification (ECN) to help avoid
congestion
Control plane protection (CoPP)
IPv4/IPv6 ACL metering
IP v4 Layer 3 functions
Host management
IP forwarding
IP filtering with ACLs, up to 256 IPv4 ACLs supported
VRRP for router redundancy
Support for up to 128 static routes
Routing protocol support (RIP v1, RIP v2, OSPF v2, BGP)
Support for DHCP Relay
Support for IGMP snooping and IGMP relay
Support for Protocol Independent Multicast (PIM) in Sparse Mode (PIM-SM) and Dense Mode (PIM-
DM).
IPv6 Layer 3 functions
IPv6 host management
IPv6 forwarding
Support for static routes
Support for OSPF v3 routing protocol
IPv6 filtering with ACLs, up to 128 IPv6 ACLs supported
Virtualization
Virtual Fabric vNICs (virtual NICs) with Ethernet, iSCSI, or FCoE traffic on vNICs
Virtual link aggregation groups (vLAGs)
802.1Qbg Edge Virtual Bridging (EVB) is an emerging IEEE standard for allowing networks to become
virtual machine (VM)-aware.
Virtual Ethernet Bridging (VEB) and Virtual Ethernet Port Aggregator (VEPA) are mechanisms for
switching between VMs on the same hypervisor.
Edge Control Protocol (ECP) is a transport protocol that operates between two peers over an
IEEE 802 LAN providing reliable, in-order delivery of upper layer protocol data units.
Virtual Station Interface (VSI) Discovery and Configuration Protocol (VDP) allows centralized
configuration of network policies that will persist with the VM, independent of its location.
EVB Type-Length-Value (TLV) is used to discover and configure VEPA, ECP, and VDP.
VMready support
Up to 2,048 virtual entities (VEs)
Automatic VE discovery
Up to 32 local or distributed VM groups for VEs
NMotion™ feature for automatic network configuration migration
RackSwitch G8264CS
9