Dirotec Nivcomp RX1 Bijlage bij de handleiding - Pagina 7

Blader online of download pdf Bijlage bij de handleiding voor {categorie_naam} Dirotec Nivcomp RX1. Dirotec Nivcomp RX1 8 pagina's. Version with test series memory and apu-control

Pagina afdrukken

installation of floorEc

System requirements

operating system: MS Windows (2000, XP, Vista, 7)

hardware: PC, Notebook

Accessories: Wireless USB-Stick for nivcomp data-transfer

installiert werden folgende dateien

Floorec.exe //FLOOREC read- and calculationsprogram

Floorec.abc //Information-data

Floorec.flos //Example-data

silabser.sys //USB-driver for CP210x (Silabs driver, usb/uart chip)

installation

The program FLOOREC is supplied on a USB-Stick. With starting the setup.exe the installation

of FLOOREC and of a driver for the wireless transfer takes place. Follow the installation-instruc-

tions.

With the first run FLOOREC is looking for a serial interface. Besides please plug in the stick

after the start of FLOOREC or remove the stick and plug it in again after about 3 seconds.

possible problems

If the serial interface (COM) is not recognized automatically, this is manually selectable in the

Setup. The wireless USB-Stick must be put for it. For further support use the technical service:

[email protected]

Free Update-service.

Settings in FLooRec

Languages: German – English

Measure: SI (metric) – not metric (Inch, Yard)

Manual adjustment of the communication-interface

dataformat / data export

List, table

Table, Excel

Graphic, windows clipboard

Rev. Sept/2010 dirotec e.K.

usa