Dirt Devil 110000 Gebruikershandleiding - Pagina 5
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dirt Devil 110000. Dirt Devil 110000 6 pagina's.
Pagina afdrukken
WASHFOAMFILTER
REPLACE FOAMFILTER
REPLACE F ILTER CARTRIDGE
Hold foam filter under running
water to wash. Ring excess
cleaner.
water out of filter. Allow filter to
dry for at least 24 hours before
replacinginfilter cartridge.
TOCLEAN THEAiR DIRECTORS
_
iiiiliiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
Click buttons back into place
To remove Air Directors, rotate
to lock filtercartridge inbase of
1/4 turn couaterclockwise.
cleaner.
Returnfoamfilter to filter cartridge.
Return filter cartridge to base of
Pull out and wipe with a dam
cloth to clean.
REPLACE DiRTCONTAINER
Dryand return the Air Directors
to the dirt container. Rotate
1/4 turn clockwise to lock in
place.
Return dirt container to cleaner.
Align slot on bottom of dirt
container with tab on cleaner.
Push to snap into place.
TOOLREQUIRED: PHILLIPS ORFLATHEAD SCREWDRIVER
WARNING:TO REDUCE THE RISKOFINJURY FROMMOVING PARTS- UNPLUG CLEANER BEFORE CHANGING BELT
ORBRUSHROLL.
TO REMOVE BELT
Lay cleanerflat and flip cleanerto expose
nozzle base. Base should lay flat and
face up. To remove nozzle guard, use
Phillips screwdriver to remove the three
(3) screws. Arrows show location of
screws.
TOREPLACE BELTORBRUSHROLL
J
Pull and lift nozzleguard off.
Lift and remove brushroll.
Disposeof old belt.
Slide belt onto motorshaft.
Place new belt in area of
Rotatebrushroll manuallyto make sure belt is
brushroll without bristles,
properly aligned.
Reattach nozzle guard.
Secure by aligning the three
(3) tabs in the base slots.
Replace all three (3) screws
to secure nozzle guard.
9
10