Nikon Nikkormar FT3 Gebruiksaanwijzing - Pagina 26
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Nikon Nikkormar FT3. Nikon Nikkormar FT3 32 pagina's.
Pagina afdrukken
FLASH SYNCHRONIZATION
The Nikkormat FT3 features
an accessory shoe
with
built-in hot-shoe
contact and automatic
MX
switch-
over
via
shutter
speed
selection
to facilitate the use
of
various light sources. Consult the table below to
find
out
which
shutter
speeds
are acceptable
for different
types
of
flashbulbs.
Synchronized
Either a
bulb-
or electronic-type
flash 'unit
slides over
the accessory shoe on
top
of
the pentaprism housing.
Due to the built-in hot-shoe
contact,
the need
for a
synch cord is eliminated for
units with
a hot shoe.
For units
without a
hot
shoe,
use
a synch cord and
connect the
threaded
synch terminal on the camera
body
to
the synch socket on the
flash unit.
To prevent
accidental electrical
shock,
the safety switch in the
accessory shoe turns on only when the flash unit is
in place.
Nikon speedlight units SB-3, SB-4 and SB-5
can
be
directly attached to the Nikkormat FT3. For mount-
ing the Nikon speedlight unit SB-2
or
flash unit BC-7,
use
of
the flash unit
coupler
AS-2 is necessary. For
details,
refer
to the instruction manual provided with
each unit.
26
Caution: Flash units without a hot
shoe
may fire accidentally
when being
slipped
illto
place or
when a flashbu lb is inserted
.
Although not recommended, accidental firing may be
prevent-
ed
by
covering
the hot-shoe
contact on
the
camera
body with
electrical tape.