Nikon Coolpix W100 Snelstarthandleiding - Pagina 13

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Nikon Coolpix W100. Nikon Coolpix W100 48 pagina's.
Ook voor Nikon Coolpix W100: Firmware bijwerken (6 pagina's), Snelstarthandleiding (5 pagina's)

Pagina afdrukken

Check the authentication

code.

After checking that the camera

and smart device display the

same six-digit authentication

code, and then follow the

steps below (note that the

code may not be displayed in

some versions of iOS, but you should follow the steps below

even if the code is not displayed).

- On the camera, press O.

- On the smart device, tap Pairing (the name of the button

may be different depending on the smart device).

Press A when the dialog at

right is displayed.

If the camera displays Could

not connect., press

R Reconnect to return to

step 4. To cancel pairing

settings, press SCancel.

Select whether to add

shooting location

information to the images

that you take.

To add location data to images,

select RYes. Turn on the

location data features in the SnapBridge app and on the smart

device (for more information, see the instructions included with

the smart device).

Auth. code

000000

Confirm that the same

authentication code is

displayed on the smart

device and press OK.

Camera

Your camera and smart device are

connected!

SnapBridge will send your photos to

your smart device as they are taken.

Download location

data from smart

device?

Yes

Get Ready