4. The firmware upgrade process will begin. This should take between three
and ten minutes depending on the speed and configuration of our
computer. The following messages will be displayed during execution:
"DO NOT TURN THE CAMERA OFF
"Writing Firmware..."
5. When the text "Writing Firmware is complete" appears in the dialog box,
the process is complete. Click "Close" to close the utility.
6. Turn the COOLPIX 5000 select dial to "Off".
7. Disconnect the USB cable
8. Verify the new firmware version in the camera (Step 6.0 above)
This completes the firmware update.
10. 0 Uninstalling the Uploader Application
1. Launch the installer by double-clicking the "Nikon E5000 Uploader
Installer" to launch the installer.
2. By default, Easy Install is selected in the installer window's pop-up menu.
Select Uninstall from the menu and click Continue.
3.When removal is complete, a message stating that the operation was
successful will be displayed. Click the Restart button to complete the
operation.
Be aware that Nikon View cannot be used until the removal of the uploader
has been completed.
11.0 If things do not go as planned
The uploader software may not function as expected on some models of
personal computer.
1."Error in writing Firmware" message
Should this occur, click "Close" to exit the uploader, disconnect the serial
cable and follow the steps above to confirm the camera firmware
version.
If the firmware version displayed is "E5000V1.6," the upgrade was
successful. Any other display, "E5000V1.5" for example, indicates that
your computer cannot be used to upgrade camera firmware. In this case
you will need to take your camera to the nearest Nikon-authorized
service center to upgrade the firmware.
2. Compatibility problems may exist between the uploader and certain
computers, making normal communication with the COOLPIX 5000
impossible.
Pagina afdrukken