Nikon FJ-CP1 Gebruikershandleiding - Pagina 16

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Nikon FJ-CP1. Nikon FJ-CP1 29 pagina's. Water-resistant case field jacket

Immerse the case

Slowly immerse the FJ-CP1 in water, stopping

if water enters the case. Test in a shallow area

(1 m / 3 ft. or less) or in a tub or bucket. Do not

use hot water, as this could exceed the operating

temperature range of 0–40 °C (32–104 °F).

Check for leaks

Keep the case immersed and check whether any

bubbles are emitted. After two to three seconds,

take the case out of the water and check whether

any droplets are inside.

Test the shooting controls

Immerse the case and operate the controls

underwater for two to three minutes, checking

whether any bubbles are emitted or any water

enters the case.

Check for water inside the case

Take the FJ-CP1 out of the water and check for

water inside the case. If water has entered the

case, check the seal (

10). If the cause of the

leak can not be determined, take the product to a

Nikon-authorized service representative.

After checking for leaks, dry the case thoroughly before inserting the camera.