Nikon WR-R10 Snelstarthandleiding - Pagina 2
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Nikon WR-R10. Nikon WR-R10 6 pagina's. Wireless remote controller/wr adapter
Ook voor Nikon WR-R10: Gebruikershandleiding (2 pagina's), Gebruikershandleiding (2 pagina's), Handmatig (6 pagina's), Gebruikershandleiding (6 pagina's)
Pagina afdrukken
2
Check the current firmware version
The menus displayed on your camera may differ from those shown here.
1
Connect the wireless remote controller to the camera as described in the
wireless remote controller manual.
2
Turn the camera on. If you are updating the firmware for a WR-1, set the
Tx/Rx/OFF switch to Rx.
3
Press the camera MENU button to display the menus.
4
Select Firmware version in the setup
menu.
5
The current firmware version will be
displayed. Confirm that the firmware
version is the correct version for this
update.
6
Exit to the setup menu and turn the camera off.
Mac
"#.##" is the firmware version.
2