Nikon Eclipse E400 Gebruiksaanwijzing - Pagina 14

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Nikon Eclipse E400. Nikon Eclipse E400 21 pagina's. Teaching head/multi teaching head
Ook voor Nikon Eclipse E400: Gebruiksaanwijzing (33 pagina's), Gebruiksaanwijzing (33 pagina's)

Pagina afdrukken

Assembly for the triple-viewing model

1 Check that the serial numbers on the two components (on the main section and the

relay section) of the MTH relay unit are identical. (If the numbers are different,

observation will be adversely affected. In this case, please contact your dealer or

nearest Nikon representative.)

2 Adjust the height of the support stand so that the main observer section and the

secondary observer section are horizontal. This step is facilitated by first adjusting the

support stand to an approximate height before attaching the stand.

3 In the illustration below, the secondary observers are positioned on the right side of the

main observer, but they may also be positioned on the left. Attach the MTH main

splitter so that the pointer mounting surface is facing towards the front.

4 When mounting the attachment on the inverted microscopes TE300 and TE200, the TE-

TI intermediate eyepiece tube and E400/600 eyepiece tube are required. Attach the TE-

TI intermediate eyepiece tube instead of the original eyepiece tube and mount the MTH

main splitter on it.

See the illustration on P.12 for the installation of the TE-TI intermediate eyepiece tube.

ND filter (φ28 mm)

Clamp for 5

Ensure that the pointer

mounting surface faces

the front.

Clamp for 3

[Remarks]

If a trinocular eyepiece tube T is used for the main observer section, you can provide the image to the vertical

tube of the eyepiece tube by setting the optical path to the "BINO & PHOTO" position. If the ND filter is

removed in advance from the eyepiece tube mounting port of the MTH main splitter, the main and the secondary

observers will be able to view an image with more uniform brightness. This should be convenient such as when

performing the TV observation.

MTH main splitter

Clamp for 7

Main observer section

III. Assembly

MTH relay unit

Check that the

serial numbers

are the same.

MTH relay unit

Secondary

observer section

Place

horizontally

Height adjustment

clamp screw

Adjust to an

approximate height

and readjust later.

Main section

Upper surface

should also be

horizontal.

Clamp for 9

Clamp for 8