Nikon Forestry Pro Gebruiksaanwijzing - Pagina 9
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Nikon Forestry Pro. Nikon Forestry Pro 19 pagina's.
Ook voor Nikon Forestry Pro: Gebruikershandleiding (48 pagina's)
Pagina afdrukken
Operational Summary
En
7. Switching Target priority modes (Factory default setting is
Distant Target Priority mode.)
First Target Priority
Distant Target Priority
[
]
[
]
1. LCD panel should be on.
2. Press and hold MODE button, then depress and hold
POWER button within 0.5 second.
Note） I f the POWER button is not pressed within 0.5
second, the display unit (m/yd/ft) will be switched.
3. Continue to press and hold both buttons (more than 2
seconds) until First Target Priority mode and Distant Target
Priority mode are switched.
Note: If buttons are not pressed in the correct order,
switching will not take place.
Note: If switching fails to take place, repeat 2.
4. Release buttons.
Note: Because Target Priority mode is not displayed
while Angle mode is set, switching is made but
visual confirmation is impossible. Switch to another
measuring mode for confirmation.
[Deciding which Target Priority to use]
When obtaining different results from a single measuring
operation, the Nikon Laser Forestry Pro will display the distance
to the farthest target on the LCD panel when using Distant Target
Priority mode, while First Target Priority mode will show the range
to the nearest target.
16
ex.) When measuring a tree standing in front of a house;
Tree
Fence
House
Distance to Target
115m
123m
128m
"115m" (distance to the tree) will be displayed in First Target
Priority mode, and "128m" (distance to the house) in Distant
Target Priority mode. First Target Priority mode, for example,
has applications for golf, while Distant Target Priority is useful
when hunting in heavily wooded areas.
8. Low battery indication
Flashing
indicates that the battery power is low and
battery should be replaced. (See "Changing Battery")
Specifications
Measuring system
Measuring mode display
Linear distance
Horizontal distance
Height
Angle
Vertical separation (height between two points ): Hgt + Hgt2
Three-point measurement : Hor + Hgt + Hgt2
Distance: 10-500 meters/11-550 yards/33-999 feet
Measuring distance/ angle range
Angle:
Act
Distance-
(Linear distance)
angle
Hor
Display
(Horizontal distance)
steps
Hgt
(Height)
Ang (Angle)
Linear distance
Horizontal dist.
Height
Angle
System
First Target Priority/Distant Target Priority switching system
Optical system
Type
Roof-prism monocular
Magnification (x)
6
Effective diameter of objective lens
ø21
(mm)
Angular field of view (real) (˚)
6.0
Eye relief (mm)
18.2
Exit pupil (mm)
ø3.5
Dioptre adjustment
±4m
: Act
: Hor
: Hgt
: Ang
(999 feet: 304.5 meters/333 yards)
±89°
0.5m/yd., 1.0 ft. ( ＜ 100m/yd./ft.)
1.0m/yd., 1.0 ft. ( ≧ 100m/yd./ft.)
0.2m/yd., 0.5 ft. ( ＜ 100m/yd./ft.)
1.0m/yd., 1.0 ft. ( ≧ 100m/yd./ft.)
0.2m/yd., 0.5 ft. ( ＜ 100m/yd./ft.)
1.0m/yd., 1.0 ft. ( ≧ 100m/yd./ft.)
0.1° ( ＜ 10°), 1.0°( ≧ 10°)
0.5m/yd., 1.0 ft.
0.2m/yd., 0.5 ft.
0.2m/yd., 0.5 ft.
0.1°
-1
En
17