Cub VS-95A043 Gebruikershandleiding & Installatiehandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding & Installatiehandleiding voor {categorie_naam} Cub VS-95A043. Cub VS-95A043 16 pagina's. Blind spot detection system for passenger cars
Pagina afdrukken
4
After connecting the radar and main power harness, hide the wires along
with the ceiling to the C-pillar on the driver side, and connect the left
and right turn signal wirings to the car's left and right turn signal trigger
wires(+) with crab clips.
5
Continue to hide the main power harness along with the ceiling or down
the door frame's waterproof strip to the driver side's A-pillar, connect the
indicators and buzzer, and hide the two wire harnesses into the door
rubber strip.
If there is a risk of airbags'interference when hiding harness, please hide
harness down the door frame's waterproof strip to the driver side' s A-pillar.
6
Attach the left indicators directly to the A-pillar at an appropriate visible
height, or attach it to an iron plate, insert it between the A-pillar and the
instrument panel, and then adjust the best viewing angle. Attach the
alarm buzzer at a position near the instrument panel.
Note: Please ensure the positive
electrode of the left and right
turn signals by a multimeter.
Note: If the turn signals are
not connected, the system will
alarm by illuminating indicators
only.
Note: If the surface of the
A-pillar has a velvet cover, the
indicators will be unable to fix
firmly. It is recommended to
install it with an iron plate.
8