Dirt Devil LET'S GO. DDW02-R01 Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Dirt Devil LET'S GO. DDW02-R01. Dirt Devil LET'S GO. DDW02-R01 20 pagina's.

REPlACE THE DIRTY WATER TANk

1. Tilt the front of the

carpet cleaner base off the

carpet with one hand.

2. Grasp the handle and

hook the front of the dirty

water tank into the base,

making sure that the front

of the dirty water tank is

resting on the base.

The dirty water tank

has three tabs on the

underside which MUST

latch on to the underside

of the base of the cleaner.

The base must be lifted so

that the nozzle is flush

with the base of the

cleaner.

3. While making sure the

dirty water tank is resting

on the base, place the

rear of the tank into the

base of the cleaner, push

down on the handle until

it clicks into place. Empty

and rinse clean the water

tank after use.

NOTE: Failure to install the

dirty water tank correctly

will result in poor dirty

water pick up.