Clas Ohlson HTD562 Gebruiksaanwijzing
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Clas Ohlson HTD562. Clas Ohlson HTD562 5 pagina's. Set of two 6700 mah powerbanks
Pagina afdrukkenSet of Two 6700 mAh Powerbanks
Art.no 38-8243
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for any
errors in text or images and any necessary changes made to
technical data. In the event of technical problems or other queries,
please contact our Customer Services.
Safety
• Never subject the product to direct sunlight, high temperatures,
dusty environments or heavy vibrations.
• Do not use the product if it or its mains lead/charger lead is
damaged in any way.
• The product must not be taken apart or modified.
• Do not use the product in an area where flammable liquids or
gases are used or stored.
• Never expose the product to impacts, shocks, rain, liquids or moisture.
• The product must only be charged via a USB port.
Product description
2
1
1
1. Docking connector
2. Charging station
3. LED battery status indicators
4. USB port for charging electronic devices such as mobile phones
5. Micro-USB port for charging the powerbank
6. [
] On/off
Instructions for use
Charging the powerbank using the charging station
1. Connect the charging station (2) to a computer or other USB charger.
2. Push the powerbank down onto the docking connector (1).
3. When all of the battery status indicator LEDs (3) shine
constantly, the powerbank is fully charged.
4. Charging time is 4 hours if one powerbank is charged on its own
or 8 hours if both powerbanks are charged at the same time.
Charging the powerbank using the Micro-USB port
1. Connect a charger lead (sold separately) to the Micro-USB port (5)
and to a computer or other USB charger.
2. When all of the battery status indicator LEDs shine constantly,
the powerbank is fully charged.
3. The charging time is 4 hours.
GREAT BRITAIN • CUSTOMER SERVICE
tel 020 8247 9300 internet www.clasohlson.co.uk e-mail [email protected]
postal 10 – 13 Market Place, Kingston Upon Thames, Surrey, KT1 1JZ
Model HTD561/562
3
4
5
6
Charging external devices
1. Connect the external device to the USB charge port (4) using
a charger cable (sold separately).
2. Press [
] (6) to begin charging. The battery status LED
indicators will light up for a few seconds showing how much
power is left in the powerbank before going out again. If you
wish to check the charge status of the powerbank whilst
charging is in progress, press [
3. The powerbank will shut off and stop charging the external
device as soon as the device is fully charged. If you wish to
interrupt charging before the device has fully charged, simply
disconnect the charger cable.
Capacity
LED 1
LED 2
75–100 % Steady glow Steady glow Steady glow Steady glow
50–75 %
Steady glow Steady glow Steady glow Off
25–50 %
Steady glow Steady glow Off
5–25 %
Steady glow Off
< 5 %
Flashing
Off
Care and maintenance
• Clean the product using a lightly moistened cloth. Use only mild
cleaning agents, never solvents or corrosive chemicals.
• Fully charge the product every third month if it is not to be used
for a long time.
• Store the product in a dry, dust-free place.
Responsible disposal
This symbol indicates that this product should not
be disposed of with general household waste.
This applies throughout the entire EU. In order to
prevent any harm to the environment or health
hazards caused by incorrect waste disposal,
the product must be handed in for recycling so that
the material can be disposed of in a responsible
manner. When recycling your product, take it to
your local collection facility or contact the place
of purchase. They will ensure that the product is
disposed of in an environmentally sound manner.
Specifications
Capacity
Input for charging the powerbank 5 V DC, 2 A
Output
Charging time
Size
Weight
Operating temperature
] again.
LED 3
LED 4
Off
Off
Off
Off
Off
6700 mAh
5 V, 2.1 A
4–8 hours
92 × 43 × 23 mm
138 g
0–45 °C