ABB REX 521 Bedieningshandleiding - Pagina 17

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} ABB REX 521. ABB REX 521 20 pagina's. Relay retrofit program, cutting tool

9. Finishing the work

1. It is advisable to coat bare surfaces, for example

with cold galvanized compounds, in case of corrosive

atmosphere.

Install the new replacement relay.

2. Push the new replacement relay firmly against the

panel cut-out.

3. Add the four fixing brackets.

4. Tighten all the four fixing bracket screws step by

step. Use tightening torque of 1.3...1.7 Nm.

C u t t i n g To o l O p e r at i n g G u i d e