Dirty Hand Tools 103350 Bedieningshandleiding - Pagina 14

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} Dirty Hand Tools 103350. Dirty Hand Tools 103350 16 pagina's. 10” mini-cultivator

Pagina afdrukken

Storage

DO NOT STORE THE CULTIVATOR IN

UNVENTILATED AREA

where fuel fumes may reach ame, sparks, pilot lights

Drain fuel outdoors away from any ignition sources.

Use only approved fuel containers.

Never store equipment with gasoline in the tank inside of a

closed building where fumes may reach an open ﬂame or spark.

Allow the engine to cool before storing in any building.

Add a fuel stabilizer to gas tank and run for 10-15 minutes to

prevent fuel from gumming up during an extended storage period.

Prepare for Storage

Follow the steps below to prepare your cultivator for storage. Read

your engine manual for detailed instructions on preparing the

engine for storage.

1. Protect wheels and axles from rust: Remove lock pin and slide

wheel oﬀ hub. Coat the axles lightly with axle grease. Slide wheel

back on hub and insert lock pin.

2. Drain fuel system completely following engine manufacturer's

instructions or add fuel stabilizer to prevent fuel from gumming

up during extended storage period.

3. While engine is still warm, drain the oil from the engine. Reﬁll

with fresh oil of the recommended grade.

4. Clean external surfaces, engine and cooling fan.

5. Remove spark plug, pour one ounce of SAE 30 oil into spark

plug hole.

6. Plug hole and pull starter cord slowly to distribute oil evenly in

cylinder head area.

7. Reinstall spark plug.

8. Transport unit to a suitable storage location. If you have chosen

to use a fuel stabilizer and have not drained the fuel system,

follow all safety instructions storage precautions in this manual

to prevent the possibility of ﬁre from the ignition of gasoline

fumes. Remember, gasoline fumes can travel to distant sources of

ignition and ignite, causing risk of explosion and ﬁre.

9. If there is any possibility of unauthorized use or tampering,

remove the spark plug and store it in a safe place before storing

the cultivator unit. Be sure to plug the spark plug hole to prevent

foreign material from entering.

WARNING

or other ignition source.