DIRTY HANDS 104611 Bedieningshandleiding - Pagina 13

Blader online of download pdf Bedieningshandleiding voor {categorie_naam} DIRTY HANDS 104611. DIRTY HANDS 104611 20 pagina's.

REMOVE

SCREWS

4 PLACES

Figure 5

AIR FILTER

COVER

Figure 6

AIR FILTER

COVER

Figure 7

Maintenance

Engine Oil Replacement

1. Place the machine on a level surface and warm up the engine

2. Loosen four screws and remove the cover on the left side of

3. Remove the oil filler cap/dipstick. (see Figure 6)

4. Tilt the generator to drain the oil into an oil pan or container.

5. Replace the generator on a level surface.

6. Add SAE10/30W engine oil to the fill level and replace the oil

7. Reinstall the cover and tighten the four screws.

Air Filter

Maintaining an air cleaner reduces engine damage and wear.

1. Loosen four screws and remove the cover on the left side of

2. Remove the large screw that holds the air filter cover in place

3. Wash the air filter in warm water and mild detergent several

4. Reinstall the filter, the air filter cover and the generator cover.

OIL FILLER CAP/

DIPSTICK

AIR FILTER

for several minutes. Then stop the engine and turn the fuel

On/Off switch to "OFF"". Turn the fuel tank cap air vent

clockwise.

the generator with recoil handle (see Figure 5).

filler cap/dipstick.

the generator with recoil handle (See Figure 5).

then remove the air filter (see Figure 7).

times. Rinse. Squeeze out excess water and allow it to dry

completely. Soak the filter in lightweight oil briefly, then

squeeze out the excess oil. The element should be wet but not

dripping.

The engine should never run without the air filter,

excessive piston and/or cylinder wear may result.

CAUTION