Disc Makers ReflexFlash11 Gebruikershandleiding - Pagina 11
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Disc Makers ReflexFlash11. Disc Makers ReflexFlash11 13 pagina's. High-speed usb duplicator
Pagina afdrukken
t
Illustration 3 For source device with FAT16 or FAT32 file system whose content is located
content size is bigger than the capacity of the target drive(s) :
Source
2GB
6. Asynchronous (Menu Function 6.6)
User may select to turn on or off the Asynchronous copy mode. If set to off, all copy
n
process will be completed in Synchronous copy mode. Press the UP and Down buttons
to scroll, and press ENT to select and exit.
7. Language (Menu Function 6.7)
User may select the menu language between English and Japanese.
n
Press the UP and DOWN buttons to scroll, and press ENT to select and exit.
3. Additional Information
• Source drive and target drive(s) are recommended to
be of the same capacity specification
Data transforming from a source to target drives of many different specifications or
capacity takes longer to complete, slows down the system performance and may cause data
loss in the process. Therefore, it is not recommended to use cards/ drives with specifications
or capacity different from that of the source device.
• If user must copy card of big capacity difference:
1. In Setup menu, select Function 6.5 Ignore Size and set it to "Don't Care" to remove the
limit on tolerance percentage
2. Then select Function 6.2 Analyze source and set it to OFF
User Guide 1.0
ReflexFlash
Target
1GB
[Asynchronous]
On
[Language]
English
www.discmakers.com/techsupport
copy Fails. Data size is bigger than the capacity of the
target device. Insufficient memory space to complete
the copy process.
10