Disc Makers ReflexUltra Snelstarthandleiding - Pagina 2
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Disc Makers ReflexUltra. Disc Makers ReflexUltra 2 pagina's. Dvd±r
Ook voor Disc Makers ReflexUltra: Snelstarthandleiding (2 pagina's), Gebruikershandleiding (13 pagina's)
Pagina afdrukken
DIRECT DISC TO DISC COPY
The Disc-to-Disc mode will duplicate the DVD
master that is placed in the ReflexUltra's top drive –
also called the Source (Src) drive – to blank Ultra
DVD-Rs or DVD+Rs that are loaded into the unit's
remaining drives. The ReflexUltra has been preset
to duplicate in the Hard Drive-to-Disc mode, but
can easily be set to the Disc-to-Disc mode.
1
Power on the ReflexUltra by pressing the round
button at the bottom right on the front of the unit.
The system will initialize and perform a self-test,
which will be displayed on the LCD display area.
2
When the self-test is complete, the 1. Copy dis-
play will appear on the LCD screen. Press the
DOWN arrow until 8. Select Source appears on
the display screen.
3
Press the ENT button and the following image
will appear on the display screen:
SRC: HDD
00 IDE0 Master
4
Press the DOWN arrow once. Src: DVD Dual
01 IDE1 Master will be displayed on the screen.
Press the ENT button and the LCD will display
DVD Dual Selected. Press ENT again.
5
Press the UP arrow to return to 1. Copy. You
will notice that P: A is no longer displayed on this
screen. P: A is only displayed when copying in the
Hard Drive-to-Disc mode (see opposite side of
this guide).
6
To start the duplication process, load the top
drive with your DVD master. Load the remaining
drives with the number of Ultra DVD-Rs or
DVD+Rs you wish to duplicate.
7
Press the ENT button to begin duplicating. The
unit will automatically analyze the master disc (this
T
may take several seconds), and begin duplicating
at the maximum recording speed.
8
The LCD will display the copying progress. The
screen will display OK: when the duplication is
complete. Next to OK: will be the number of
successfully copied discs.
www.discmakers.com
Note: When the duplication process is completed, the
writer drives will automatically eject the discs that have
been duplicated successfully. The LCD screen will display
the number of copies that have PASSED. If any discs
have not been duplicated successfully, the LCD screen
will display the number of copies that have FAILED. The
discs that have not duplicated successfully will remain in
their drives until the eject button on the drive is pressed.
For information on why a DVD-R or DVD+R might not
copy successfully, please see the User's Guide on the
attached CD.
1-888-800-4041