ARMTEL ACM-IP2 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} ARMTEL ACM-IP2. ARMTEL ACM-IP2 20 pagina's. Analogue subsystems module

Pagina afdrukken
When working on ADSL line, ADSL-IP2 Adapter supports standards IEEE802.3,
IEEE802.3u, ITU G.992.1 ... 992.5, which provide duplex communication with non-symmetrical
channel bandwidth and the frequency range from 26 kHz to 1.1 MHz with the speed of
the incoming stream is up to 24 Mbit / s, which makes it possible to use a twisted pair cable
to organize the system. The length of the communication line using ADSL can reach 5.5 km,
if the conditions specified in the ITU G.992.1 ... 992.5 standards are met.
When working on a wireless data link, Wi-Fi adapter supports IEEE 802.11a/b/g/n
protocol to operate at 2.4 GHz with a bandwidth of up to 20 MHz. The speed of data transfer
using Wi-Fi technology reaches 300 Mbit / s. The adapter uses all-directional Wi-Fi antenna
with a gain of 5dBi, which enables to place the access point at a distance of up to 100 meters
from the adapter or more - depending on the characteristics of the antenna on the access
point.
1.3 Main specifications and operational characteristics of ACM-IP2 are given in
the Table 1.
Table 1 – Main specifications and operational characteristics
Power supply by PoE plus line (IEEE 802.3at), V
Rated voltage, V
External power supply voltage range, V
Maximum current consumption at nominal power supply voltage:
- for version RMLT.465275.006, mA
- for version RMLT.465275.006-01, mA
Bandwidth (-3 dB level), Hz
Communication interface
Communication protocol
Overall dimensions, mm
Weight, kg
* Two Ethernet ports, one being stand-by, also with power supply via PoE line
armtel.com
Parameter
Main specifications of ACM-IP2
ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
Value
from -36 to -60
from 300 to 6800
100BaseT Ethernet*
«Armtel-IP», SIP
174×125×55
(0,3 ± 0,02)
Product Passport
ENG
-48
-48
510
610
page 5/16
© Armtel