Blade Vusion 250 V2 Gebruiksaanwijzing - Pagina 4

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Blade Vusion 250 V2. Blade Vusion 250 V2 18 pagina's. Fpv-ready racing drone rtf

Pagina afdrukken

First Flight Preparation

• Remove and inspect contents

• Begin charging the ﬂ ight battery

• Install the transmitter batteries

• Install the video transmitter antenna

• Install the ﬂ ight battery in the aircraft

(once it has been fully charged)

• Bind your transmitter

• Familiarize yourself with the controls

• Find a suitable area for ﬂ ying

Charging Warnings

CAUTION: All instructions and warnings must be

followed exactly. Mishandling of Li-Po batteries can

result in a ﬁ re, personal injury and/or property damage.

• NEVER LEAVE CHARGING BATTERIES UNATTENDED.

• NEVER CHARGE BATTERIES OVERNIGHT.

• By handling, charging or using the included Li-Po battery,

you assume all risks associated with lithium batteries.

• If at any time the battery begins to balloon or swell,

discontinue use immediately. If charging or discharging,

discontinue and disconnect. Continuing to use, charge

or discharge a battery that is ballooning or swelling can

result in ﬁ re.

• Always store the battery at room temperature in a dry

area for best results.

• Always transport or temporarily store the battery in a

temperature range of 40–120º F (5–49° C).

• Do not store battery or model in a car or direct sunlight.

If stored in a hot car, the battery can be damaged or even

catch ﬁ re.

Battery Charging

The Vusion 250 quadcopter operates with a 3-cell (3S), 11.1V

LiPo battery. The included charger is capable of charging 2 or

3S LiPo batteries.

To charge the included 3S LiPo battery:

1. Connect the AC power adapter to the charger.

2. Connect the AC adapter to 120V outlet.

3. Insert the ﬂ ight battery balance connector to the 3S

balance port on the charger. The charger will begin

charging.

4. Disconnect the battery from the charger when the

charging process is complete.

LED indicators:

Power LED, Solid Red: Power ON

Charge LED, Solid Red: Charging

Charge LED, Solid Green: Charge Complete

Charge LED, Flashing Red: Error

Flying Checklist

❏ Always turn the transmitter on ﬁ rst

❏ Plug the ﬂ ight battery into the lead from the ﬂ ight control board

❏ Allow the aircraft to initialize and arm properly

❏ Fly the aircraft

❏ Land the aircraft

❏ Unplug the ﬂ ight battery from the ﬂ ight control board

❏ Always turn the transmitter off last

• Always charge batteries away from ﬂ ammable materials.

• Always inspect the battery before charging.

• Always disconnect the battery after charging, and

let the charger cool between charges.

• Always constantly monitor the temperature of the

battery pack while charging.

• ONLY USE A CHARGER SPECIFICALLY DESIGNED TO

CHARGE LI-PO BATTERIES. Failure to charge the battery

with a compatible charger may cause a ﬁ re resulting in

personal injury and/or property damage.

• Never discharge Li-Po cells to below 3V under load.

• Never cover warning labels with hook and loop strips.

• Never charge batteries outside recommended levels.

• Never charge damaged batteries.

• Never attempt to dismantle or alter the charger.

• Never allow minors to charge battery packs.

• Never charge batteries in extremely hot or cold places

(recommended between 40–120° F or (5–49° C) or place

in direct sunlight.