Cub Cadet 521R Gebruikershandleiding - Pagina 7
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Cub Cadet 521R. Cub Cadet 521R 20 pagina's. Single stage snow thrower
Pagina afdrukkenSECTION 3: KNOW YOUR SNOW THROWER
Read this owner's manual and safety rules and labels before operating your snow thrower. Compare the
illustrations in Figure 9 with your equipment to familiarize yourself with the location of various controls and
adjustments. Save this manual for future reference.
WARNING: The operation of any snow thrower can result in foreign objects being thrown into the
operator's eyes and causing severe eye damage. Always wear safety glasses while operating the
snow thrower, or while performing any adjustments or repairs on it.
Discharge Chute
IMPORTANT: This unit is shipped without gasoline or
oil. See separate engine operator's manual for proper
fuel and engine oil recommendations.
Starter Handle
This is used to manually start the engine.
Auger Control Handle
Located on the upper handle, the auger control handle
is used to engage and disengage the augers. The
snow thrower is designed to be propelled by the
rotation of the augers.
Chute Crank
Located on right side of dash panel, the chute crank
determines the direction that snow will be discharged.
Turn clockwise to discharge snow to the left; turn
counterclockwise to discharge to the right.
Discharge Chute
The angle of the discharge chute controls the distance
that the snow is thrown. Tilt the discharge chute up for
greater distance; tilt down for less distance. Loosen
the hand knob on the side of the discharge chute to
Auger Control
Handle
Chute Crank
Shave
Plate
Auger
* Only on model 521E
Figure 9
Upper Handle
Spark
Primer
Plug
Button
Cover
Starter
Handle
Choke Lever
Off
On
adjust. Tilt the chute to the desired position, and
tighten the knob.
Choke Lever
This lever is located on the engine and has to be
placed in "ON" position to start a cold engine.
Primer Button
This is also located on the engine and is used to inject
fuel directly into the carburetor to start a cold engine.
Do not use it to start a warm engine. Follow engine
manual to prime engine.
Ignition Key
This key has to be placed in the "ON" position to start
the engine.
Spark Plug Cover
Spark plug is located under the cover.
Electric Starter
(If equipped)
This is used to start engine with a 120V power source.
Plug for Electric Start
The electric starter requires use of a two prong
outdoor extension cord and a 120V power source.
7
Ignition
Key
Electric
Starter*
Plug for
Electric
Cord*
(If equipped)