Discount Car Stereo A2DIY-JAG97CD Beknopte installatiehandleiding - Pagina 2

Blader online of download pdf Beknopte installatiehandleiding voor {categorie_naam} Discount Car Stereo A2DIY-JAG97CD. Discount Car Stereo A2DIY-JAG97CD 8 pagina's. Bluetooth for select pre-1998 jaguar with cd changer

Pagina afdrukken
PRODUCT SAFETY & DISCLAIMER
READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING, FAILURE TO DO SO MAY CAUSE
PERSONAL INJURY OR DAMAGE TO PRODUCT AND/OR PROPERTY
•
This installation guide is provided as a GENERAL installation guide, some vehicles vary and
may require additional steps. We do not accept responsibility for third party labor charges
or modifications. Exercise due-diligence when installing this product.
•
We do not accept any responsibility for vehicle damage or personal injury resulting from
the installation of this product.
Careless installation and operation can result in equipment damage
•
Requirements
Functioning CD changer in trunk or hatch
Introduction
Just because you drive an order car does not mean you have to settle for old
technology. Any pre-1998 Jaguar with functional 6-disc changer in trunk/hatch
can benefit from this module to make/receive phone calls, stream apps (Music,
GPS etc.) while also retaining usage of the CD changer. In addition, an optional
"Fast charge" USB port is available to keep those current hungry devices
charged while on the road. The A2DIY-JAG97CD upgrades older Jaguars to
support Bluetooth features only available on newer cars.
Warning: A functioning 6-disc changer required. 6-disc CD changer remains
connected and functional. Will not work if changer is missing or
See Frequently Asked question at the end of this guide for more details.
Introduction
This module connects to "CD" port on radio. R
required.
To assist in removing radio, click link below:
https://www.youtube.com/watch?v=vpAIdr6V3iE
.
malfunctions.
Disconnect 8—pin CD changer plug (See Fig. 1) from radio "CD" port
1.
(See Fig. 2)
Fig. 1
Fig. 2
Connect factory 8—pin plug to module 8—pin connector (See Fig. 3)
2.
Connect module 8—pin plug (See Fig. 1) to radio "CD" connector (See
3.
Fig.2)
adio removal