Armytek Optoelectronics Wizard Pro Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Armytek Optoelectronics Wizard Pro. Armytek Optoelectronics Wizard Pro 2 pagina's.

Pagina afdrukken

Armytek Wizard Pro

The most technically advanced flashlights in the world.

Operation

Armytek Wizard Pro flashlight has two operation types:

General

1. General. The headlamp is switched on/off permanently.

main 1

main 2

2. Tactical. Press and hold the button — the headlamp will deliver light

off

on (main)

main 3

while the button is held. The headlamp will switch on in the last memorized

mode (except for the Strobe). This type of operation is useful for short-time

Tactical

off

lighting and setting signals.

To access the Tactical operation type, unscrew the tailcap to 1/4, press

the button and tighten the tailcap again holding the button pressed. To

return to the General type, unscrew the tailcap to 1/4 and tighten it again.

While in the General type, you have a convenient momentary access to

Maximum

the following Modes:

max

Main. Click the button in OFF-state. Press and hold — to switch 3 main

modes in a cycle, and release — to select one. It is memorized after switching

max

off so next time you can access it in 1 click.

Maximum. Double click in Main mode for persistent activation (returns

Firefly

with another double click).

oﬀ

Click (shortly) and hold the button in Main mode for temporary activation

ﬁreﬂy 1

off

firefly 1

max

(returns to the last mode when button is released).

main 3

firefly 1

firefly 2

ﬁreﬂy 2

main 2

main 1

firefly 2

main 1

Firefly. Press and hold in OFF-state to activate. Release — for selection.

Double click — returns to the last Main mode. It is memorized after switching

Strobe & Decimal Voltage Indication

off — for 1 click access. If press and hold after Firefly activation, the headlamp

strobe

main

will switch between 2 Firefly types, then 3 main modes, then Maximum and

strobe 1

turn off (as the protection from accidental switching in a bag or pocket will

strobe 2

work out).

battery

Strobe. 4 clicks shortly in ON-state to activate. Double click — returns to

Lock-out function. Unscrew the tailcap

the last Main mode. Press and hold after activation to switch between 2

to 1/4 for the protection from accidental

Strobe types and Decimal Voltage Indication. It is memorized after

switching on. The State Indication will be

switching off so next time you can access it shortly (also Decimal Voltage

temporarily turned off.

Indication).

Automemorizing. After switching oﬀ the last used Mode (except for the

Switching off/on of State Indication

Strobe) is memorized for quick 1-click access at next switching on.

Decimal Voltage Indication — the headlamp is switched on for

off

3 seconds for the battery loading in the last mode and then blinks:

3.7 Volts = 3 blinks - pause - 7 blinks. (Zero = 0.8 seconds of light.)

Armytek Wizard Pro headlamp is supplied with indication system — a color

LED built-in to the button.

Battery Warning Indication

State Indication

State Indication — short flash every 4 seconds. Shows the battery voltage

3.2 V

(even in OFF-state). It can also help you to find your headlamp at night (e.g.

3.1 V

2.0 V

2.9 V

≥ 3.4 V

forgotten on the grass).

1 s

3.3 V

3.2 V

State Indication can be turned on and off: unscrew the tailcap to 1/4,

3.1 V

2.9 V

press the button and holding the button pressed — tighten the tailcap and

< 2.9 V

4 s

then open it again. The settings will be memorized even when battery is

< 2.9 V

changed.

0.5 s

Warning Indication. In ON-state shows the battery voltage and the temperature inside the headlamp.

The voltage. When it drops to 3.2V, the color LED shows the warning level once a second and the main LED flashes 3

times. Critical level <2.9V is color indicated twice a second and light output decreases by 25%.

The temperature. When it increases to +70 °C, the main LED flashes 5 times. After +75°C the light output

decreases to Main3 mode. At critical level >+80°C light output decreases to Firefly2 mode.

Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.

Please read this manual carefully before using the flashlight.

Born to exceed.

USER MANUAL

With ambient temperature is +25..+30°C the headlamp delivers light in Maximal mode for about 5—7 minutes and

then the brightness steps down to the Main3 mode. 10—60 seconds afterwards the brightness increases to the

Maximal level again. This stepping goes cyclically to maintain the user's safety and the headlamp's functionality. In

the conditions of good air-cooling the headlamp produces constant light even in Maximal mode.

1. Always follow the instructions from this manual and recommendations on battery usage.

2. Apply only the recommended power sources.

3. Do not reverse battery polarity.

4. Do not use different power sources together, i.e. old ones with new ones, charged with

discharged. Do not use different types of batteries combined as the element with less

capacity can be damaged.

5. Do not modify or recast the flashlight and its components as it will deprive you of the

warranty.

6. Do not allow water or any other liquid to leak into the flashlight.

7. Do not aim a turned-on flashlight at people's or animals' eyes — it can cause temporary

blindness.

8. Do not allow children to use the flashlight without your assistance.

Armytek Optoelectronics Inc. shall not be liable for any harm done to the user if it was

caused by improper use of the product.

It is recommended to clean the threads and O-ring off dirt and old grease. Remember that secure protection from

water and dust cannot be provided by worn out sealing. And fouling as well as lack of lubricant cause fast wear-out of

threads and sealing rings.

To clean the threads do the following:

Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as

they can damage the ring).

2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out

or damaged replace it by a new one.

Clean the metal threads with a brush using ethanol. Be careful not to allow applied liquid to get inside the

flashlight or tailcap as it can cause fails in functionality of the flashlight.

After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.

The application of automotive and other improper grease can cause swelling and damage of the sealing rings.

In case of active operation and exploitation in dusty environments it is recommended to perform cleaning and

lubricating of the parts as often as required, even if it is more than twice a year.

Armytek provides free warranty repair for 10 years from the purchase.

Warranty doesn't cover damage caused by:

1. Improper usage.

2. Attempts to modify or repair the flashlight by nonqualified specialists.

3. Longtime application in chlorinated or polluted water, or other liquids (other than water).

4. High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).

5. Usage of low-quality batteries.

Web: www.armytek.com Email: [email protected]

Address: 67 Vandervoort Dr, Richmond Hill, Ontario, L4E 0C7, Canada

Specifications are subject to change without notice.

The most technically advanced flashlights in the world.

Warnings

Care and Storage

Service and Warranty

Armytek Optoelectronics Inc.

www.armytek.com

Born to exceed.