Cub Cadet 59A30053150 Installatiehandleiding
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Cub Cadet 59A30053150. Cub Cadet 59A30053150 2 pagina's. 72" mulch kit
Pagina afdrukken
59A30053150 mulch kit is designed for use with three-blade fabricated cutting decks found on select Cub Cadet models. Refer to your machine's
Operator's Manual or consult your Cub Cadet dealer to assure compatibility.
Carton Contents
Before beginning installation, remove all parts from the carton to make sure everything is present. Carton contents are listed below and shown in
Figure 1-1. Part numbers are shown in parentheses.
•
Two 1" Carriage Bolts
•
Nine 3⁄4" Carriage Bolts
Baffle Removal
WARNING:
Before beginning
installation, place the tractor on a
firm and level surface, set the
parking brake, place the PTO in
the disengaged (OFF) position,
stop the tractor's engine and
remove the ignition key to prevent
unintended starting.
WARNING: Cutting blades are
sharp. Always protect hands by
wearing heavy leather work
gloves to grasp blades.
1.
Remove the cutting deck from beneath
the tractor as instructed in your tractor's
Operator's Manual.
2.
Gently flip the deck over to expose its
underside.
Printed In USA
I
nstallatIon
72" Mulch Kit — 59A30053150
(710-3168)
•
Eleven Flange Nuts
(710-3178)
•
One Discharge Baffle
3.
Remove the chute deflector baffle from
the underside of the deck by removing the
two carriage bolts and flange lock nuts that
secure it to the deck. See Figure 1-2.
CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
M
anual
(712-05007)
(703-10794)
Figure 1-1
Figure 1-2
•
One Center Baffle
•
One Left Baffle
4.
When the baffle is removed, re-install the
two carriage bolts and flange lock nuts
into the deck. See Figure 1-2.
5.
Remove the existing baffle from the
underside of the deck by removing the
four bolts and flange lock nuts that
secure it to the deck. See Figure 1-3.
Figure 1-3
Form No. 769-11636
(703-10795)
(703-10797)
April 26, 2016